|
Post by Todd Schreiner on Feb 5, 2008 0:51:12 GMT -5
wanted a practise table didnt want to spend the $500 on one so i built this table out of all wood {only because im better working with wood then metal}.Built so it can be broke down easily to 4 legs,bottom and the top.all build to spec accept the pegs also gave it my own custom look ;D total build time 5 hours ,cost $60
|
|
|
Post by twistedbluesteel on Feb 5, 2008 1:09:24 GMT -5
excellent table
I wish I knew how to post pics 'cause I just finished my table as well. Mine has a 2 1/2 solid oak top with metal frame and I added adjustable posts to attach tubing to for training alone.
|
|
|
Post by Mr. Espey on Feb 5, 2008 2:14:56 GMT -5
That is a pretty cool looking table... different. The only concern I would have is the wooden pegs holding the pin lines. Those might cause a few injuries.
|
|
|
Post by Brian Kehler on Feb 5, 2008 2:20:19 GMT -5
That is a pretty cool looking table... different. The only concern I would have is the wooden pegs holding the pin lines. Those might cause a few injuries. Agreed... might be beneficial to get rubber or foam for those. Otherwise looks pretty sharp
|
|
|
Post by Todd Schreiner on Feb 5, 2008 7:50:21 GMT -5
ya everything is built to be takin off easy couldnt find anything to use for the pin pad any ideas? and ya i also have it rigged for resistance and weight but those are my secrets
|
|
|
Post by Curtis "Smash" Klashinsky on Feb 5, 2008 11:32:44 GMT -5
Very nice looking table. I like the different look to it. Just use bicycle hand grip covers for you pin line posts. Drill holes just big enough to squeeze them into and you should be good. let me look for a picture to show you....... This is one of Team Saskatoons practice tables. I circled the pin line peg which is just a bicycle hand grip cover that is shoved into a hole drilled into the table. Hope this helps. Once again, great job on the neat looking table.
|
|
|
Post by Curtis "Smash" Klashinsky on Feb 5, 2008 11:33:46 GMT -5
excellent table I wish I knew how to post pics 'cause I just finished my table as well. Mine has a 2 1/2 solid oak top with metal frame and I added adjustable posts to attach tubing to for training alone. If you want, You could email me the picture at SMASH@INTHEHOOK.COM and I will happily post the picture for you.
|
|
|
Post by twistedbluesteel on Feb 5, 2008 19:11:59 GMT -5
thank's Curtis, I'll try and get a couple to you
|
|
|
Post by Todd Schreiner on Feb 5, 2008 20:50:53 GMT -5
thanks for the tip curtis never thought of those gonna track some down asap
|
|
|
Post by Curtis "Smash" Klashinsky on Feb 5, 2008 21:00:25 GMT -5
thank's Curtis, I'll try and get a couple to you Sure, I will get them up for ya shortly after I receive them. thanks for the tip curtis never thought of those gonna track some down asap No problem
|
|